Fluke iSee™ Mobile Thermal Camera - TC01A
Fluke iSee™ Mobile Thermal Camera - TC01A - Never miss any detail with real-time high and low temperature capture and Comprehensive temperature analysis for spot, line and area, supported with professional thermal imaging mobile software.
Detailed image quality comparable to professional thermal cameras
Powerful full temperature range analysis
Real-time image sharing for fast and easy communication
Small and portable, takes only a second to get started
Specifications: Fluke iSee™ Mobile Thermal Camera - TC01A
Performance Specifications | |
IR resolution | 256 x 192 |
Pixel size | 12 μm |
Temperature range | -10 °C to 150 °C, 100°C to 550 °C |
Temperature accuracy | ± 2% of rdg or ± 2 °C, whichever is greater (@ 25 °C ± 5 °C ambient temperature) |
Temperature measurement distance | 0.25 m to 5 m |
Frame rate | 25 Hz |
Warm-up time | 1 minute |
Focal length | Fixed focal length: 3.2 mm |
Shutter mode | Built-in automatic shutter |
Thermal sensitivity (NETD) | 50 mK |
Spectral range | 8 to 14 μm |
Field of view (H x V) | 56° x 42° |
Spatial resolution | 3.81 mrad |
General Specifications | |
USB Interface | Type-C |
Operating temperature | 0 °C to 40 °C |
Storage temperature | -30 °C to 60 °C |
Operating humidity | 10% to 90% RH, non-condensing |
Power consumption | 350 mW (Typical) |
Drop test | 1 m |
Ingress protection | IEC 60529: IP54 |
Operating altitude | 2000 m |
Storage altitude | 12 000 m |
Dimensions (L x W x H) | 59 x 32 x 10 mm |
Weight | 22 g |
EMC Environment | IEC 61326-1: Portable |
CISPR 11: Group 1, Class A | |
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. | |
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. | |
Caution: This equipment is not intended for use in residential environments and may not provide adequate protection to radio reception in such environments. | |
Warranty | 2 years |