Fluke 233/A Remote Display Automotive Digital Multimeter Kit

What would you do if you could be in two places at once?

By simply sliding the wireless display out of the Fluke 233/A’s meter body, the technician can place the display where it is most easily seen—up to 10 meters (33 feet) from the point of measurement—while putting the meter in the best position to take measurements. The removable display has a magnetic back and flat bottom so it can be mounted or placed on any flat surface where it can be conveniently seen. When the display is attached to the meter body the Fluke 233/A operates as a conventional multimeter.

The detachable wireless display lets automotive technicians:

Find a comfortable position to view and record test data, even when the test location is hard to reach or in a dirty or noisy environment.
Attached test leads to brake lights while sitting in the driver seat, pressing the brake pedal and viewing the display.
Safely view underhood measurements on moving vehicles.
Separate the tasks of positioning the meter and reading test results, devoting full attention to each job—and working more safely.
Run tests and read results at a safe distance from high-voltage, high-current systems. The Fluke 233 is safety rated for use in CAT III 1000 V, CAT IV 600 V working environments, important for technicians working on hybrid vehicles.

Designed by Fluke engineers and manufactured at the Fluke Worldwide headquarters in Everett, Washington, the Fluke 233 is safety rated for use in CAT III 1000 V, CAT IV 600 V working environments. This is important for technicians working on hybrid vehicles, which routinely work with high-voltage, high-current systems not found on conventional vehicles.

True RMS AC voltage and current for accurate measurements on non-linear signals
Measure up to 1000 V AC and DC
Measure up to 10 A (20 A for 30 seconds)
10,000 μF capacitance range
Frequency to 50 kHz
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Resistance, continuity and diode test
Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
The removable magnetic display can be conveniently mounted where it is easily seen
Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
Use as a conventional multimeter when the display is connected
Radio transmitter automatically turns off when the display is connected to the meter
Auto power off maximizes battery life
Min/Max and Average recording to capture variations automatically
Test continuity and diodes
Easy to read display with large digits and bright backlight
Battery life approximately 400 hours