TS 30 Series Test Sets

The TS30 features the latest in telephone test set case design, at an affordable price.

  • High impedance DataSafeTM operation in monitor mode
  • DropSafeTM reliability passes 20-foot drop test
  • RainSafeTM protection in severe weather conditions
  • Mute switch
  • Last number redial
  • Audible ringer for callbacks

Recognized as the industry standard for basic test sets, the TS30 Test Set provides superior quality at an affordable price. With its high impedance Monitor for DataSafe™ operation, technicians can clip onto a line in Monitor mode without disrupting existing traffic.

Fluke Networks’ unsurpassed RainSafe™ protection standards and DropSafe™ durability assure the test set will keep working even in the toughest environments. Solid weatherproofing provides enhanced resistance to severe weather conditions.

Features

The TS®30 Test Set top features include:

  •  High impedance monitor mode
  • Automatic regulation of speech levels
  • Tone and pulse operation
  • Last number redial in tone and pulse modes
  • RainSafe™ weather protection for use in extreme weather conditions
  • Hook flash button
  • Fully functional with either line polarity
  • Audible electronic ringer for call backs
  • High current and over voltage protection
  • High impact polycarbonate case
  • Field replaceable spring-loaded belt clip
  • Hearing aid compatible receiver
  • Transmitter Mute switch
  • Talk and Monitor modes
  • Ergonomic design
  • Lightweight unit is easily transported

Models

  • 30800001 TS30 test set with piercing pin clips
  • 30800009 TS30 test set with ABN
  • 12001005 TS120 test set with alligator clips (outside of N. America only)

Specifications

Electrical

  • Return Loss >14 dB (ref 600 Ω)
  • Line Current Range 15 mA to 120 mA
  • Resistance to Continuous Current (Talk Mode) 275 Ω typical at 20 mA
  • Monitor Mode Impedance >120,000 Ω 300 Hz to 3400 Hz

Pulse Dial Output 

  • Pulsing Rate 10 pps pps
  • Open/Close Ratio 60/40
  • Inter-digit Interval 800 ms %, -10% 
  • Resistance During Pulse Open > 200,000 Ω
  • Protection Against Alternating Current Overvoltage The TS30 survives up to 250 Vrms across its test leads.
  • Peak Acoustic Output of the Receiver <120 dBspl
  • DTMF Output Tone Frequencies Tone Frequency Error per ITU-T Q.23 ±1.5% Maximum

Tone Level

  • High Group Low Group -4 dBm (into 600 Ω) -6 dBm (into 600 Ω)
  • High vs Low Tone Difference 2dB +1db​​​​​​​

Last Number Redial (Tone/Pulse)

  • Memory Capacity Memory Retention 23 digits 8-minutes nominal
  • Flash Duration  600 ms ±100 ms
  • Ringer Loudness > 70 dBA at 1 meter​​​​​​​
  • Ringer Equivalent (REN) 0.14
  • Measurements 10 in x 2.83 in x 3.34 in (25.5 cm x 7.2 cm x 8.5 cm)​​​​​​​
  • Weight 16.8 ounces (0.476 kg)​​​​​​​

​​​​​​​Environmental

  • Temperature Operating -4 °F to +140 °F (-20°C to +60°C) ​​​​​​​
  • Storage -40 °F to +151 °F (-40°C to +66°C)​​​​​​​
  • Relative Humidity 5% to 95%​​​​​​​

​​​​​​​Safety 

  • Telecom Electrical  TNV-3​​​​​​​
  • Safety Classification IP54​​​​​​​

Regulatory Standards Used

  • 47 CFR Part 15, Subpart B
  • ICES-003 Issue 3
  • AS/NZS 3548
  • EMC Directive 89/336/EEC, EN 55022:98, EN 61326:97, A1:98 Annex C, EN 61000-4-2,
  • EN 61000-4-3
  • LV Directive 73/23/EEC, EN 610010.1 (1993)

Certifications and Compliance

  • CAN/CSA-C22.2 No. 60950-1-03 CAN/CSA-C22.2 No. 1010.1-92 CSA-C22.2
  • No. 1010.1B-97, UL/ANSI 3111-1​​​​​​​

Looking for the Best Engineering Solution for your Project?

WhatsApp Chat with us