The FXC2000 flatbed cutter is the ultimate solution for prototyping and small production runs of rigid packaging media and other sheet fed materials. With Graphtec’s medium to large flatbed cutting plotters, you have the right tool for contour cutting without requiring a die. Reduce media waste and processing time with included, dedicated software.

Added offline, USB operation enables operators of all skill levels to process various types of media for cutting.

Up to 1 Kg Cutting Force & 400 mm/s Cutting Speed

Interface: Ethernet, USB2.0 and Serial RS-232C | Intuitive 3.7” LCD Screen | Digital Servo Motor USB Flash Memory for Offline Operation | Win & Mac Compatible


  • FCX2000-60 (VC)  36”x24”
  • FCX2000-120 (VC)  36”x47.2”
  • FCX2000-180 (VC)  36”x70.8”

Table size in the Line-up

3 different table size with choice of vacuum suction or electrostatic media-hold down methods depending on application.


Distance between the holes has been improved from 30 mm on FC2250 Series to 20 mm on FCX2000 Series, as a result, FCX2000 Series provides stronger suction power to hold heavier and thicker medias down.


holds media with the use of external electric vacuum pump.  This is the preferred method for heavier and thicker media.  The Redesigned Cutting Table has increased hold-down capability by its increased number of vacuum holes.  This redesign is significantly valuable when cutting smaller objects that have less of surface area.

Provided tools suitable for many applications

  • The FCX2000 series has 2 tool holder in the carriage.
  • Using 2 different kind of tool allows to do a different job
  • without exchanging a tool at the same time. it can increase work efficiency.

Tool Holders & Cutting/Creasing Tools

Dual Tool Holders which can hold a cutting blade and creasing tool — to produce creases/folds and cuts on the same run.  Maximum Cutting Force – Tool 1: 500 gf, Tool 2: 1,000 gf

Intuitive 3.7” LCD display

Onboard control and settings are simplified using the equipped 3.7” LCD (240×128 dots) and tactile control panel.

Lope for cutting blade (PM-CT-001)

This standard accessory helps to easily adjust the extruded blade lengths for the PHP33 and PHP35 blade holders.

Image 1: Improved and increased Y-bar rigidity

For precision cutting accuracy

Image 2: Safety enhancement

A new, dedicated emergency STOP switch is at the ready.  Supports a dedicated stop switch for stopping the machine when emergency case is occurred.

Image 3: Roll-media stocker

The FCX2000 comes equipped with a mounted roll-media stocker.  Supports media width up to 37.4” and weight up to 11 lbs.

Expanded Contour Cutting Area

This included function expands the print and cut area to include objects outside of the registration marks! Production efficiency is enhanced and media waste is reduced.

Supports Standard Crop Marks

Contour cutting pre-printed media is also possible using “standard crop marks.” This operation is available with the included Cutting Master 4 plug-in workflow.

Reversed Color Registration Marks

Registraiton marks are detectable when there is sufficient contrast against the mark and its background. Ultra glossy and reflective media offer challenges for accurate registration mark detection. With this reversed color output, the sufficient contrast is brought back for the ability to contour cut pre-printed ultra glossy and reflecting sheeting.

Looking for the Best Engineering Solution for your Project?

WhatsApp Chat with us