|
| Feature |
TPS2012 |
TPS2014 |
TPS2024 |
| Isolated
Channels |
2 |
4 |
4 |
| Bandwidth*1
(MHZ) |
100 |
100 |
200 |
| Sample
Rate (GS/s) per channel |
1.0 |
1.0 |
2.0 |
| Record
Length |
2.5 K points |
| Display
(1/4 VGA LCD) |
Color |
| Battery
Operation |
Capacity for two
hot-swappable battery packs. One standard battery
pack offers 4 hours of battery operation.
Optional second battery pack extends battery
operation to 8 hours.
Continuous battery operation is possible by
hot-swapping charged batteries. |
| Automatic
Measurements |
11 |
| Isolated
External Trigger Input (Impedance Isolated) |
Yes |
| Vertical
Resolution |
8-bits (normal
or with averaging) |
| Vertical
Sensitivity |
2 mV to 5 V/div
on all models with calibrated fine adjustment |
| DC
Vertical Accuracy |
±3% |
| Vertical
Zoom |
Vertically expand
or compress a live or stopped waveform |
| Max
Input Voltage (1 MΩ)*2 |
300 VRMS
CAT II at BNC signal to BNC shell, 1000 VRMS
CAT II at probe tip to earth ground with optional
P5120 passive, high-voltage probe |
| Float
Voltage*2 |
600 VRMS
CAT II or 300 VRMS CAT III BNC
shell to earth ground, 1200 VRMS
CAT II between any two channel commons with each
of the channel commons not being more than +/-
600 VRMS from earth ground |
| Position
Range |
2 mV to 200 mV/div
±2 V; >200 mV to 5 V/div ±50 V |
| Bandwidth
Limit |
20 MHZ |
| Linear
Dynamic Range |
±5 div |
| Time
Base Range |
5 ns to 50 s/div |
5 ns to 50 s/div |
2.5 ns to 50 s/div |
| Time
Base Accuracy |
50 ppm |
| Input
Impedance |
1 MΩ
±2 % in parallel with 20 pF |
| Input
Coupling |
AC, DC, GND |
| Horizontal
Zoom |
Horizontally expand
or compress a live or stopped waveform |
| FFT |
Standard |
| RS-232,
Centronics-Parallel Ports |
Standard |
| PC
Connectivity |
Standard |
| Integrated
CompactFlash® Mass Storage |
Standard |
| Power
Measurements |
Optional package
that offers instantaneous power waveform analysis,
waveform analysis, harmonics analysis, switching
loss, phase angles, dv/dt and di/dt cursors |
*1 Bandwidth is 20 MHZ at 2 mV/div, all
models. Bandwidth is 200 MHZ typical at 5 mV/div,
200 MHZ models only. Bandwidth is 200 MHZ typical
between 40 °C and 50 °C, 200 MHZ models
only.
*2 Please refer to Environmental and Safety
specifications.
Acquisition Modes
Peak Detect - High frequency and random glitch
capture. Captures glitches as narrow as 12 ns typical
using acquisition hardware at all time/div settings
from 5 μs/div to 50 s/div.
Sample - Sample data only.
Average - Waveform averaged, selectable: 4,
16, 64, 128.
Single Sequence - Use the Single Sequence
button to capture a single triggered acquisition sequence
at a time.
Scan/Roll Mode - At acquisition time base
settings of ≥100ms/div .
Trigger System (Main Only)
Trigger Modes - Auto, Normal, Single Sequence.
Trigger Types
Edge (rising or falling) - Conventional level-driven
trigger. Positive or negative slope on any input.
Coupling selections: AC, DC, Noise Reject, HF Reject,
LF Reject.
Video - Trigger on all lines or individual
line, odd/even or all fields from composite video,
or broadcast standards (NTSC, PAL, SECAM).
Pulse Width (or Glitch) - Trigger on a pulse
width less than, greater than, equal to, or not equal
to a selectable time limit ranging from 33 ns to 10
sec.
Trigger Source
2-channel model - CH1, CH2, Ext, Ext/5, Ext/10.
4-channel models - CH1, CH2, CH3, CH4, Ext,
Ext/5, Ext/10.
Trigger View
Displays trigger signal while trigger view button
is depressed.
Trigger Signal Frequency Readout
Provides a frequency readout of the trigger source
with 6-digit resolution.
Cursors
Types - Voltage, Time.
Measurements - ΔT, 1/ΔT (frequency),
ΔV, dv/dt*3, di/dt*3.
*3 Requires TPS2PWR1 power application
package.
Measurement System
Automatic Waveform Measurements - Period,
Frequency, +Width, -Width, Rise time, Fall time, Max,
Min, Peak-to-Peak, Mean, Cycle RMS.
Waveform Processing
Operators - Add, Subtract, Multiply, FFT.
FFT - Windows: Hanning, Flat Top, Rectangular;
2048 sample points.
Sources -
2-channel models: CH1 - CH2, CH2 - CH1, CH1 + CH2,
CH1 × CH2.
4-channel models: CH1 - CH2, CH2 - CH1, CH3 - CH4,
CH4 - CH3, CH1 + CH2, CH3 + CH4, CH1 × CH2,
CH3 × CH4.
Autoset Menu - Single-button, automatic setup
of all channels for vertical, horizontal and trigger
systems, with undo autoset.
Autorange - Allows the user to change test
points without resetting the oscilloscope.
Autoset Menu for Multiple Signal Types
| Signal Type |
Autoset Menu Choices |
| Square wave |
Single-cycle, Multi-cycle,
Rising or Falling Edge |
| Sine Wave |
Single-cycle, Multi-cycle,
FFT Spectrum |
| Video (NTSC,
PAL, SECAM) |
Video (NTSC, PAL, SECAM) Field:
All, Odd, or Even Line: All or Selectable Line
Number |
Nonvolatile Storage
| Nonvolatile Storage |
Standard (with
CompactFlash® Mass Storage) |
| Reference Waveform
Display |
Two 2500 point
reference waveforms |
| Waveform Storage |
96 or more reference
waveforms per 8 MB |
| Setups |
4000 or more
front panel setups per 8 MB |
| Screen Images |
128 or more screen
images per 8 MB (the number of images depends
on file format selected) |
| Save All |
12 or more Save
All operations per 8 MB. A single Save All operation
creates 2 to 9 files (setup, image, plus one file
for each displayed waveform). |
Display Characteristics
Display - 1/4 VGA, passive color LCD with
color on black background with adjustable multi-level
contrast and brightness controls.
Interpolation - Sin(x)/x.
Display Types - Dots, vectors.
Persistence - Off, 1 sec, 2 sec, 5 sec, infinite.
Format - YT and XY.
I/O Interface
Printer Port (standard) - Centronics-type
Parallel.
Graphics File Formats - TIFF, PCX (PC Paint
Brush), BMP (Microsoft Windows), EPS (Encapsulated
Postscript) and RLE.
Printer Formats - Bubble Jet, DPU-411, DPU-412,
DPU-3445, Thinkjet, Deskjet, Laser Jet, Epson Dot
(9- or 24-pin), Epson C60, Epson C80.
Layout - Landscape and Portrait.
RS-232 Port (standard) - 9-pin DTE.
RS-232 Programmability - Full talk/listen
modes. Control of all modes, settings and measurements.
Baud rate up to 19,200.
Mass Storage CompactFlash® Memory -
. Accepts any Type 1 CompactFlash® card, up to and
including 1 GB (card not included).
Built-in Clock/Calendar
OpenChoice PC Communications Software -
. Seamless connection from oscilloscope to PC through
RS-232.
. Transfer and save settings, waveforms, measurements,
and screen images.
. Includes a Windows desktop data transfer application
in addition to convenient Microsoft Word and Excel
Toolbar Add-ins.
Environmental and Safety
Temperature -
Operating: 0 °C to +50 °C.
Non-operating: -40 °C to +71 °C.
Humidity - TPS2000 Series oscilloscopes are
not intended for use in wet or damp conditions.
Operating:
high: 50 °C / 60% RH.
low: 30 °C / 90% RH.
Non-Operating:
high: 55 °C to 71 °C / 60% RH max wet bulb.
low: 30 °C to 0 °C / < 90% RH max wet bulb.
Altitude -
Operating: up to 3,000 m.
Non-operating: 15,000 m.
Pollution Degree 2 - Do not operate in an
environment where conductive pollutants may be present
(as defined in IEC61010-1:2001).
Enclosure Rating - IP30: when the CompactFlash®
card and power analysis software are installed (as
defined in IEC60529:2001)
Electromagnetic Compatibility - Meets the
intent of Directive 89/336/EEC. Meets or exceeds:
Australian EMC Framework, demonstrated per Emission
Standard AS/NZS 2064.1/2.
General Certifications - Russian GOST EMC
regulations; Chinese Metrology Certification (CMC).
Safety - UL61010-1: 2004. CAN/CSA22.2 No.
1010.1: 2004. EN61010-1: 2001.
Do not float the P2220 probe common lead to >30 VRMS.
Use the P5120 (floatable to 600 VRMS
CAT II or 300 VRMS CAT III) or similarly
rated passive, high-voltage probe or an appropriately
rated high-voltage, differential probe when floating
the common lead above 30 VRMS, subject
to the ratings of such high-voltage probe.
CAT Ratings
Overvoltage Categories
| Category |
Examples of Products in this Category |
| CAT III |
Distribution-level mains,
fixed installation |
| CAT II |
Local-level mains, appliances,
portable equipment |
| CAT I |
Signal levels in special equipment
or parts of equipment, telecommunications, electronics |
Materials - TPSBAT battery contains less than
8 grams equivalent Lithium.
Physical Characteristics
| INSTRUMENT |
| Dimensions |
mm |
in. |
| Width |
336.0 |
13.24 |
| Height |
161.0 |
6.33 |
| Depth |
130.0 |
5.10 |
| Weight |
kg |
lbs. |
| Instrument only |
2.7 |
6.0 |
| with 1 battery |
3.2 |
7.0 |
| with 2 batteries |
3.7 |
8.0 |
| INSTRUMENT SHIPPING |
| Package Dimensions |
mm |
in. |
| Width |
476.2 |
18.75 |
| Height |
266.7 |
10.50 |
| Depth |
228.6 |
9.00 |
|
