| |
TDS
3012B |
TDS
3014B |
TDS
3024B |
TDS
3032B |
TDS
3034B |
TDS
3044B |
TDS
3052B |
TDS
3054B |
| Bandwidth |
100 MHZ |
100 MHZ |
200 MHZ |
300 MHZ |
300 MHZ |
400 MHZ |
500 MHZ |
500 MHZ |
| Channels |
2 |
4 |
4 |
2 |
4 |
4 |
2 |
4 |
Sample
rate on each channel |
1.25
GS/s |
1.25
GS/s |
2.5
GS/s |
2.5
GS/s |
2.5
GS/s |
5 GS/s |
5 GS/s |
5 GS/s |
Maximum record
length |
10 K points on all models |
| Vertical resolution |
9 Bits on all models |
| Vertical sensitivity
(/div) |
1 mV - 10 V on all models |
| Vertical accuracy |
±2% on all models |
Max input
voltage (1 MΩ) |
150 VRMS CAT I on all
models (300 V CAT II with standard 10X
probe) |
| Position range |
± 5 div on all models |
| BW limit |
20 MHZ |
20 MHZ |
20, 150 MHZ |
20, 150 MHZ |
20, 150 MHZ |
20, 150 MHZ |
20, 150 MHZ |
20, 150 MHZ |
| Input coupling |
AC, DC, GND on all models |
| Input impedance
selections |
1 MΩ in parallel with 13 pF
or 50 Ω on all models |
| Time base Range |
4 ns - 10 s/div |
4 ns - 10 s/div |
2 ns - 10 s/div |
2 ns - 10 s/div |
2 ns - 10 s/div |
1 ns - 10 s/div |
1 ns - 10 s/div |
1 ns - 10 s/div |
| Time base Accuracy |
20 ppm on all models |
| Display (VGA) |
Color active matrix LCD on all models |
TDS3000B DPO provides breakthrough test speeds
for telecommunications line card testing. The telecom
QUICKMENU puts all the commonly used telecom testing
functions on a single menu.
Custom video trigger allows the TDS3000B to
trigger on standards such as RS343 (26.2 KHZ
scan rate).
Trace and identify ITU-R BT.601 video signals
with the TDS3SDI 601 serial digital video module.
Acquisition Modes
DPO - Captures and displays complex waveforms, random events and
subtle patterns in actual signal behavior. DPOs are able to provide
3 dimensions of signal information in real time: Amplitude, time, and the
distribution of amplitude over time.
Peak Detect - High frequency and random glitch capture. Captures
glitches as narrow as 1 ns.
WaveAlert® - Monitors the incoming signals on all channels and
alerts the user to any waveform that deviates from the normal waveform being
acquired.
Sample - Sample data only.
Envelope - Max/Min values acquired over one or more acquisitions.
Average - Waveform data from 2 to 512 (selectable) acquisitions is
averaged.
Single Sequence - Use the Single Sequence button to capture a
single triggered acquisition sequence at a time.
Trigger System
Main Trigger Modes - Auto (supports Roll Mode for 40 ms/div and
slower), Normal.
B Trigger - Trigger after time or events.
Trigger After Time Range - 13.2 ns to 50 s.
Trigger After Events Range - 1 to 9,999,999 events.
External Trigger Input - >1 MΩ in parallel with 17 pF; Max input
voltage is 150 VRMS.
Trigger Types
Edge - Conventional level-driven trigger. Positive or negative
slope on any channel. Coupling selections: DC, noise reject, HF reject, LF
reject.
Video - Trigger on all lines, odd, even or all fields. With
TDS3VID or TDS3SDI, trigger on individual lines and on analog HDTV formats
(1080i, 1080p, 720p, 480p).
Logic -
PATTERN: Specifies AND, OR, NAND, NOR when true or false for a specific
time.
STATE: Any logic state. Triggerable on rising or
falling edge of a clock. Logic triggers can be used
on combinations of 2 inputs (not 4).
Pulse -
WIDTH (or GLITCH): Trigger on pulse width less than, greater than, equal
to, or not equal to a selectable time limit ranging from 39.6 ns to 50 s.
RUNT: Trigger on a pulse that crosses one threshold but fails to cross a
second threshold before crossing the first again.
SLEW RATE: Trigger on pulse edge rates that are either
faster or slower than a set rate. Edges can be rising,
falling, or either.
Comm (requires TDS3TMT) - Provides isolated pulse triggering
required to perform DS1/DS3 telecommunications mask testing per ANSI T1.102
standard.
Alternate - Sequentially uses each active channel as a trigger
source.
Measurement System
Automatic Waveform Measurements - Period, Frequency, +Width,
-Width, Rise Time, Fall Time, +Duty Cycle, -Duty Cycle, +Overshoot,
-Overshoot, High, Low, Max, Min, P-P, Amplitude, Mean, Cycle Mean, RMS,
Cycle RMS, Burst Width, Delay, Phase, Area*2, Cycle Area*2.
Display any four measurements from any combination
of waveforms. Or display all measurements with measurement
snapshot feature. Measurement statistics*2.
Thresholds - Settable in percentage or voltage.
Gating - Measurements can be gated using the screen or vertical
cursors.
Waveform Processing
Deskew - Channel-to-channel deskew ±10 ns may be manually entered
for better timing measurements and more accurate math waveforms.
Arithmetic Operators - Add, subtract, multiply, divide, arbitrary
math expressions*2.
Autoset - Single-button, automatic setup on selected input signal
for vertical, horizontal and trigger systems.
Display Characteristics
Waveform Style - Dots, vectors and variable persistence.
Graticules - Full, grid, cross-hair, and frame. NTSC, PAL, SECAM,
and vectorscope (100% and 75% color bars) with optional TDS3VID and TDS3SDI
video application modules.
Format - YT, XY and Gated XYZ (XY with Z-axis blanking available
on TDS30X4B only).
*2 Requires TDS3AAM module.
I/O Interface
Hard Copy Port (standard) - Centronics-type parallel.
Ethernet Port (standard) - 10Base-T LAN, RJ-45 female.
TDS3GV Communications Module -
GPIB (IEEE -488.2) programmability: Full talk/listen modes; control of
all modes, settings, and measurements.
VGA: Monitor output for direct display on large VGA-equipped monitors.
DB-15 female connector, 31.6 KHZ sync rate, EIA RS-343A compliant.
RS-232-C interface programmability: Full talk/listen modes; control of
all modes, settings and measurements. Baud Rate up to 38,400. DB-9 male
connector.
Programmer manual: 071-0381-02.
Hard Copy Capability
Graphics File Formats - Interleaf (.img), TIF, PCX (PC
Paintbrush), BMP (Microsoft Windows) and Encapsulated Postscript (EPS).
Printer Formats - Bubblejet, DPU-3445, Thinkjet, Deskjet, Laserjet,
Epson (9- and 24-Pin).
Environmental and Safety
Temperature - +5 °C to +50 °C (operating), -20 °C to +60 °C (nonoperating).
Humidity - 20% to 80% RH below 32 °C, derate to 30% RH at 45 °C
(operating), 5% to 90% RH below 41 °C, derate to 30% RH at 60 °C (nonoperating).
Altitude - to 3,000 m (operating), 15,000 m (nonoperating).
Electromagnetic Compatibility - Meets or exceeds EN55011 Class A
radiated and conducted emissions; EN50082-1; FCC 47 CFR, Part 15, Subpart B,
Class A; Australian EMC framework; Russian GOST EMC regulations.
Safety - UL3111-1, CSA1010.1, EN61010-1, IEC61010-1.
Physical Characteristics
| Instrument |
| Dimensions |
mm |
in. |
| Width |
375.0 |
14.8 |
| Height |
176.0 |
6.9 |
| Depth |
149.0 |
5.9 |
| Weight |
kg |
lbs. |
| Instrument only |
3.2 |
7.0 |
| with battery installed |
4.5 |
9.8 |
| Instrument Shipping Package |
| Dimensions |
mm |
in. |
| Width |
502.0 |
19.8 |
| Height |
375.0 |
14.8 |
| Depth |
369.0 |
14.5 |
| Rackmount |
| Dimensions |
mm |
in. |
| Width |
484.0 |
19.0 |
| Height |
178.0 |
7.0 |
| Depth |
152.0 |
6.0 |
|
